-
電流探頭| CT1電流探頭| CT1 The P6041 Probe Cable provides the connection between the CT1 and CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connect
查看詳細介紹 -
電流探頭| A622電流探頭| A622 This industrial-style clamp-on probe has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can be used on digital multimeters, TekMeter, and scopes. The A621 can
查看詳細介紹 -
電流探頭| A621
電流探頭| A621 The A600 Series current probes high-value current probes are specifically designed to support measurements you make with your TekMeter® or oscilloscope*1. A621 2000 Amp AC Current Probe
查看詳細介紹 -
有源探頭| P7240有源探頭| P7240 Selecting the right probe for your application is key to attaining the best signal fidelity in your measurements. Active probes provide truer signal reproduction and fidelity for high-fr
查看詳細介紹 -
有源探頭|TAP3500有源探頭|TAP3500 可將任意間的兩點浮接信號，轉換成對地的信號，以供應示波器、電表、或計算機使用,非常多的電路，尤其是電機電路，含有直流抵補（DC OFFSET） 或交流抵補（AC OFFEST）甚至*沒有對地回路，此時冒然使用示波器將造成觸電，或損壞示波器，或造成電線走火，此時唯有使用差分探頭才是的選擇。
查看詳細介紹 -
有源探頭| P7225有源探頭| P7225 ?Verification, Debug, and Characterization of High-speed Designs ?Design, Development, and Compliance Testing ?Signal Integrity, Jitter, and Timing Analysis ?Manufacturing Engineerin
查看詳細介紹 -
有源探頭| TAP2500
有源探頭| TAP2500 ?Verification, Debug, and Characterization of High-speed Designs ?Signal Integrity, Jitter, and Timing Analysis ?Manufacturing Engineering and Test ?Signals with Voltage Swings up
查看詳細介紹 -
有源探頭| TAP1500有源探頭| TAP1500 ?High-speed Digital Systems Design ?Component Design and Characterization ?Manufacturing Engineering and Test ?Educational Research ?Signals with Voltage Swings up to 16 Vp-p
查看詳細介紹 -
有源探頭|P6245有源探頭|P6245有源差分探頭可將任意間的兩點浮接信號，轉換成對地的信號，以供應示波器、電表、或計算機使用,非常多的電路，尤其是電機電路，含有直流抵補（DC OFFSET） 或交流抵補（AC OFFEST）甚至*沒有對地回路，此時冒然使用示波器將造成觸電，或損壞示波器，或造成電線走火，此時唯有使用差分探頭才是的選擇。
查看詳細介紹 -
有源探頭| P6205有源探頭| P6205 The P6205 probe is part of Tektronix' line of Low Circuit Loading Signal Acquisition probes for CSA （Communications Signal Analyzers）, DSA （Digitizing Signal Analyzers）, 11000 Series and
查看詳細介紹
在線客服